Mains Connection; Faults; Handling The Device Safely - Medion Micromaxx MD 15486 Instruction Manual

4.3. Mains connection

• Only connect the device to a properly installed 220–240 V
~, 50 Hz safety plug socket that is located close to the place
where you have set up the device. The socket outlet must be
freely accessible so that you can unplug the device from the
mains quickly if necessary.
• Ensure that the mains cable has been completely unwound
during operation.
• Do not kink or crush the mains cable.
• Disconnect the mains cable when the device is not being
used, during cleaning or if a fault occurs.
• Always remove the mains cable from the mains socket by
grasping the plug – do not pull the cable itself.

4.4. Faults

• If the plug, cable or device is damaged, immediately remove
the plug from the power supply.
• To avoid risks, never try to open and/or repair the device your-
self. There is a risk of electric shock. In the event of a fault,
contact our Service Centre or another suitable professional re-
pair workshop.
• If the mains cable on the device is damaged, i t must be re-
placed by the manufacturer, its customer service agent or an-
other suitably qualified person. This is to avoid causing dam-
age to the device.

4.5. Handling the device safely

• Never immerse the device in liquids!
• Do not use the device outdoors.
• Do not leave the device unattended during operation.
• Do not use the device under any circumstances when there is
visible damage to the device, the mains cable or the plug.
• Always hold the glass jug by the handle.
• Only pour cold water into the water tank.
DE
EN
FR
NL
DK
23 of 118