Advertisement
•
Adapter plate mounting screws
To mount a wedge camera to a TVD-
SNB wall mount with a TVD-CB2 cup
base:
1.
Pull the camera cables through the
wall mount tube. Attach the swan
neck wall mount to the wall using
the expansion anchors that are
provided with the swan neck mount.
2.
Using the four A screws, attach
wedge adapter plate to the cup
base.
3.
Screw the cup base onto the swan
neck wall mount and tighten with
the locking screw.
2 / 4
4.
Loosen the screws on the wedge
bubble assembly using the Torx
wrench that is supplied with the
camera, and remove the enclosure.
5.
Connect the cables to the wedge
camera. Using two screws that are
supplied with the wedge camera,
attach the camera base to the
wedge adapter plate.
6.
Re-attach the wedge bubble
assembly to the camera.
P/N 1073418-EN • REV A • ISS 12FEB18
Advertisement
