Advertisement
Step 6
4
Attach control box to underside of top with keyhole attachment. Tighten down keyhole screws with phillips head
screwdriver to secure control box to underside. Secure power cord and footswitch wire together to underside of top
with two cable ties as shown.
5
Step 7
Use cable zip ties to properly secure actuator wire to underside of top. First secure wire with cable tie closest to
actuator then bundle excess wire and secure with cable tie located between base assembly and control box. Repeat
procedure for Actuator A2.
Cable Zip Tie
5
7
rev. 09.09.2009 cjr
©2009 HAUSMANN INDUSTRIES, INC.
Advertisement
