Advertisement
3
Step 5
Place upholstered top over base assembly.
Place underside of upholstered top so the exposed bolt heads on each actuator fi t into (4) routed holes on each side
of wood underside of top and (3) holes in black angle irons line up with the (8) pre-drilled holes in underside.
Secure each black angle iron to subtop with (4) 1/4" - 20 x 7/8" machine screws "D" into pre-threaded t-nuts in
underside of top. Total of sixteen 1/4" - 20 x 7/8" machine screws needed for all (4) black angle irons.
Upholstered top placed on base assembly.
rev. 09.09.2009 cjr
Hole 1
Hole 2
Hole 3
Hole 4
See page 7 for
attachment of control
box (next step)
4
6
See page 7 for
attachment of wires
©2009 HAUSMANN INDUSTRIES, INC.
Advertisement
