8.TROUBLESHOOTING
8-1 Check before and after troubleshooting
Hazardous voltage can cause ELECTRICAL SCHOCK
or DEATH. Disconnect power or turn off circuit
breaker before you start checking or servicing.
8-2 Check power supply wiring
•
Check that power supply wires are connected to terminals L and N on the terminal plate in the indoor unit.
8-3 Check indoor unit wiring
•
Check that inter-unit wiring is correctly connected to the outdoor unit from the indoor unit
8-4 Check power supply
•
Check that voltage is in specified range (+/- 10% of the rating)
•
Check that power is being supplied.
8-5 Check lead wires and connectors in indoor and outdoor units
•
Check that coating of lead wires is not damaged
•
Check that lead wires and connectors are firmly connected
•
Check that wiring is correct.
WARNING
28