Data Storage; Storing Value Into Memory; Recalling Value From Memory - Fisher Scientific accumet AP 110 accumet AP 115 accumet AP 125 Instruction Manual

10. DATA STORAGE

10.1 Storing Value into Memory

The AP 110/115/125 meter can store up to 200 data
sets in its non-volatile memory.
In any Measurement mode, press save/▲to store the
measured value. "Lo XX Stored (Location number
stored) appears on the screen. The value is now
stored in the meter's non-volatile memory and the
meter returns to Measurement mode.
If memory is full, the meter will prompt whether to
overwrite the data (from the first memory location) or
not.
To overwrite the data, select 'Yes', then press
std/enter. The value is now stored in the meter's non-
volatile memory and the meter returns to Measurement
mode.
If you do not wish to overwrite the data and wish to
escape from this menu, select 'No', then press
std/enter. The meter will return to Measurement
mode without storing the data.

10.2 Recalling Value from Memory

In any Measurement mode, press view/▼. The
screen will display the latest stored data.
Data retrieval is based on a 'last-in-first-out' basis. To
view the specific data; press either save/▲or
view/▼keys to select the appropriate data location
number. Press std/enter to toggle between data and
date & time. Press mode to return to the
Measurement mode.
17