KEYBOARD & DISPLAY LCD DISPLAY Displays the weight on the scale pan. In HOLD mode, the display flashes to indicate that the real weight on the scale is not being shown, with the last registered stable weight being shown instead. Measurement unit used to indicate the weight.
Page 3
KEYBOARD & DISPLAY On / Off. Press once to switch the indicator on. Hold the key down for 2 segundos to switch off the indicator. Counting mode Switches between counting mode and weighing mode. When into the settings menu, it works as “escape”...
SCALE SETTINGS – MENU OPTIONS For access the settings menu keep the M/PLU key pressed down for 2 seconds. validate the current setting / moves to the next digit when editing a numeric value validate a manually input value. ESC Returns to the menu’s previous level without making any change.
Page 5
SCALE SETTINGS – MENU OPTIONS Calibration process • Automatic correction for gravity force effect Location code for g force correction … ...
SCALE CALIBRATION At the menu you will find the settings needed to define and adjust the measurement scale of the instrument: Measurement unit, maximal capacity, scale interval (division), decimal point, as well as different options related to the operation of the auto-zero device. Access to these configuration options is reserved for technical personnel and is protected by a keyword to avoid accidental changes that would cause the instrument to malfunction.
Page 7
TABLE OF GEOGRAPHICAL ADJUSTMENT VALUES Elevation above sea level in metres 1300 1625 1950 2275 2600 2925 3250 Geographical latitude 1300 1625 1950 2275 2600 2925 3250 3575 in the northern or Elevation above sea level in feet southern hemisphere in degrees and 1060 2130...