Gram Z3 Quick Configuration Manual

QUICK CONFIGURATION GUIDE
Connection
Connect the "RS-232 to RD3 cable Z" (Ref. 36785) to the weight indicator and to the RD3
Repeater Indicator.
Step 1: Configure the Z3 weight indicator for use with the RD3 Repeater Indicator
The Z3 indicator is factory-configured for using a PR4 model printer. For connect it to RD3 Repeater Indicator, you need to first change
this configuration before its use, following the indications contained in this document. Once this procedure has been completed, the
configuration is registered in the unit's non-volatile memory and it will not be necessary to repeat it.
Press key [M/BG] to access the configuration options menu.
1. Press key à to move to the rS232 menu option.
¿
2. Press key to validate. The visor will display the bAudr
3. Press key à repeatedly to move forward to the FOrN
4. Press key à repeatedly to move forward to the rd3
5. The visor will display the SAvE message, indicating that the selected option has been saved to the indicator's non-volatile
memory.
6. Press the ESC key repeatedly to exit the configuration options menu and return to normal operating mode (weight
indicator).
Gram Precision S.L.
Travesía Industrial, 11 · 08907
Hospitalet de Llobregat · Barcelona (Spain)
Tel. +34 902 208 000 · +34 93 300 33 32
Fax +34 93 300 66 98
comercial @gram.es
www.gram-group.com
RS-232 to RD3 cable Z (Ref. 36785)
option and press key
http://gram-group.com/wp-content/uploads/2016/12/MANUAL_Z3_2016_ENG_001.pdf
option.
¿
option and press key to access this submenu of options.
¿
to validate.
Download the full manual from the following link:
EN