IMPORTANT: The specifications given in this publication
do not include normal manufacturing tolerances.
Therefore, this unit may not exactly match the listed
specifications. Also, this product is tested and calibrated
under closely controlled conditions and some minor
difference in performance can be expected if those
conditions are changed.
Control Performance: This controller provides 4 to 20mA
or 2 to 10Vdc Proportional plus Integral modulating control
and 4(2) A On/Off control.
5-50° C (internal temperature sensor)
-20-110° C (external temperature sensor)
POWER SUPPLY: AC24V ±20%, 50/60Hz,
2 to 10Vdc OR
4 to 20mA.
MOUNTING: Direct wall mounting
with standard electrical mounting box [type-3 module].
TERMINALS: Plug-in screw terminals
are suitable for 1.5 square mm wire.
Page 2 of 18
- 1 No. (Only PT1000)
- 1 No. (Dry Contact)
- 1 No.
- 1 No.
0-50° C, 5-80%RH.
Shipping & Storage:
-20 - 45°C, 5-95%RH
< / = +/- 0.30°C
REMOTE SENSOR: RTD
Maximum 15m cable length
(line resistance < 4.5Ω)
Enclosure: ABS Plastic, 2-piece. (IP30)
See TABLE 2 for installer selections.
Zero Energy Band
Set Point Definition
Duct Mount Remote Sensor PT1000.
DIN Class B.
Model # RSPT1000
Probe Length: 300mm
(to be ordered separately)
1.5 or 3.0°C
0.5 to 3.0°C (0.5°C
2.0 to 19.0°C (0.1°C
-3.0 to 3.0°C (0.5°C
Remote or Internal