Section 5. Gw-60 Pc Utility - Locosys GW-60 Quick Start Manual

Section 5. GW-60 PC Utility

Device connection procedure : (Make sure USB driver is installed)
5.1
(1) Select COM port properly.
(2) Click "Connect" to connect device.
Once the device is connected, the firmware version will be displayed.
(Note: click
Click "Settings" to select setting function page.
5.2
In setting function page, users can change username, UTC offset, log
interval....
15
"Disconnect" before unplugging the USB cable.)
(Windows platform only)
www.locosystech.com