Section 2. Time Mode - Locosys GW-60 Quick Start Manual

Section 2. Time Mode

Clock Mode
2.1
Display local time based on the GMT setting.
Tip: Quick clock time setup for first time usage.
(1) GMT Setting: Refer to 3.6
(2) GPS Time Synchronization: Under open sky
environment, switch to
GPS fix. GW-60 will automatically synchronize to precise
GPS UTC time.
Alarm Mode
2.2
Stopwatch Mode
2.3
Timer Mode
2.4
4
↵
Press ADJUST/
Press /
▲ ▼
ADJUST / BACK to start/end adjustment.
Press START to start counting time and press again
to pause.
Press RESET to reset counting time to "00:00
Press MODE/BACK
Press ADJUST to start adjusting timer.
Press / to change numbers and
▲ ▼
button to end adjustment.
Press START to start counting down and press again
to pause.
Press RESET to restart timer
GPS mode and wait until there is
to adjust alarm time.
button to select numbers and
to exit.
".
00
MODE/BACK
www.locosystech.com