Section 5. Gw-60 Pc Utility - Locosys GW-60 Quick Start Manual

Section 5. GW-60 PC Utility

Device connection procedure : (Make sure USB driver is installed)
5.1
(1) Select COM port properly.
(2) Click "Connect" to connect device.
Once the device is connected, the firmware version will be displayed.
(Note: click
Click "Settings" to select setting function page.
5.2
In setting function page, users can change username, UTC offset, log
interval....
12
②
"Disconnect"
(Windows platform only)
before unplugging the USB cable.)
www.locosystech.com