Locosys GW-60 Quick Start Manual page 10

DIST UNIT: Distance measurement unit.
3.16
KM: Kilometer.
MI: Mile.
NM: Nautical mile.
SCROLL: Set scroll seconds in speed report
3.17
Available number: 1 sec to 2.5 sec.
USB CLASS: Connection type
3.18
COM: Virtual COM PORT for Windows platform user.
UMS: USB Mass Storage for non-Windows platform user.
(Note: Set UMS before entering "MSC mode"on 3.14)
TO USB MSC: Connection by Mass Storage Class (MSC)
3.19
mode mainly for non-Windows platform user.
Tip: How to get GPS data in USB MSC mode
(1) Set"USB CLASS"option to"UMS"first.
(Note: Before setting, the USB charging cable MUST be
disconnected.)
(2) Connect to USB, and press
MSC"to enter USB MSC state.
(3) Find a new flash drive with a READ only file—
GPSLOG.SBP on your host PC.
(4) Remove USB cable to exit.
10
↵
ADJUST/ "TO USB
www.locosystech.com