Honeywell VisionPRO Series User Manual page 8

Overriding schedules: residential use
1 Touch or
s t
temperature (right side of screen)
and the Hold Until time (left side).
The schedule will resume when the
Hold Until time expires.
2 Select Permanent Hold
temperature until you change it or
resume the program schedule.
Touch Cancel Hold
the program schedule.
Overriding schedules: commercial use
Touch or to adjust the
s t
temperature. It will be maintained until
the hold time you set.
• To change the hold time, touch the
Hold Until arrow buttons. This time
can be adjusted up to the maximum
time set by the installer.
• Touch Override
set occupied temperature if a
person uses the room during
an unoccupied period. The new
temperature will be maintained for 1
hour and can be adjusted up to the
maximum time set by the installer.
The programmed schedule will resume
when the override timer expires. Touch
Cancel Hold at any time to resume the
program schedule.
69-2761EFS—03
to adjust the
to keep the same
at any time to resume
to use a pre-
Temporary Hold
Permanent Hold
6
MCR34103
MCR34169
MCR34106