Optional Accessories - Honeywell VisionPRO Series User Manual

Optional accessories

Portable Comfort Control
If you have only one thermostat, you move this remote
control from room to room (like a portable thermostat), to
make sure the temperature is comfortable in the room you're
using. If you have multiple thermostats, you can view and
adjust the temperature in each room from your armchair.
Wireless Outdoor Sensor
With a wireless outdoor sensor, your VisionPRO
can display outside temperature and humidity. This
information can also be displayed on your handheld Portable
Comfort Control.
Wireless Indoor Sensor
If an indoor sensor is installed, your VisionPRO thermostat
will respond to temperature and humidity readings at the
sensor location—providing comfort where the sensor is
located. With multiple sensors, the thermostat can average
temperature readings from each, to optimize comfort
throughout your home.
RedLINK™ Internet Gateway
The Honeywell RedLINK Internet Gateway gives you remote
access to your VisionPRO
phone or tablet. You can view or adjust indoor temperature,
system mode and other settings. The Gateway can also send
alerts to as many as 6 email addresses to notify you if a
problem occurs.
Wireless Entry/Exit Remote
This device mounts beside your door for one-touch control.
Press AWAY to control to an energy saving temperature
when you leave home. Press HOME to control to a
comfortable temperature when you return. To change pre-set
temperatures, go to MENU > Entry/Exit Remote.
Wireless Vent and Filter Boost Remote
This device mounts anywhere in your home (typically
bathroom or kitchen) for convenient, on-demand ventilation.
For increased ventilation, select 20, 40, or 60 minutes.
®
thermostat from the web, smart
19
®
thermostat
69-2761EFS—03