Replace The Battery; Attach The Hinge-Type Clip - Mitel 5602 User Manual

Ip-dect system 3300 ip communications platform

Hide thumbs Also See for 5602:

Table of Contents

Replace the Battery

If the standby time for the cordless handset becomes too low, the battery should be replaced.

Please contact your system administrator or your supplier for information about new batteries.

Insert the battery as described in the illustration below.

Note: After replacing the battery, the "Battery" icon may show an empty battery even

though it is fully charged. Charge the battery for at least one hour to get the correct

reading.

Note: Do not disconnect the battery unless it needs to be replaced.

Attach the hinge clip as described in the illustration below.

Maintenance

Table of Contents