Registration; Over Air Registration - Mitel 5602 User Manual

Registration

Over Air Registration

The 5602 wireless handset can subscribe up to eight different base station systems. To
subscribe a new system, you need to know the "Park:" (Portable Access Right Key code) and
"Ac:" (Authentication code) related to the system to which you want to log on. Contact your
system administrator for more information.
Caution:The master LDAP Server must be running when you register a new handset.Do
not register a new handset when the master LDAP Server is down even if you have a
standby LDAP Server. Handsets that are registered to a standby LDAP server must be
re-registered with the master LDAP server when it comes back into service.
1. In the Toolbox menu, select Network and press YES.
2. Select Subscribe and then press YES.
3. Enter the Park: code, press YES.
4. Enter the Ac: code and then press YES.
5. Enter the new system name and then press YES.
6. If the new system is to be protected, select Yes. You can switch between the Yes and No
settings using the Left and Right navigation keys.
7. Press YES to save the setting.
8. Press YES again.
9. If the handset is new to the network, do the following:
- dial the number assigned to the handset
- when you receive a busy signal, press NO to hang up
10. To complete registration, you must go offhook and then back onhook. Press YES, select
Offhook, and then press YES. Press NO to go back onhook.
Select Base Station
1. In the Toolbox menu, select Network and press YES.
2. Press Select and then press YES.
3. Select a specific system from the list or select Automatic to let the phone select a system
according to the priority list. See "Priority for the Base Systems" on page 30.
4. Press YES.
5. At the "Connect to XXX" prompt, press YES again. You are prompted to wait while the
phone selects the network.
Registration
29