Komatsu PC210LC-6K Operation & Maintenance Manual page 250

29. INTRODUCTIONS OF ATTACHMENTS
PC240-6K, PC240LC-6K, PC240NLC-6K
For trimming of a slope and rolling compaction.
can be used for general digging.
can be used only for light - duty digging & loading work.
cannot be used.
x
Categories of use
For general digging
For light duty digging
For loading work
• For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durabil-
ity and high wear resistance be employed.
NOTICE
• When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage.
Operate the boom carefully.
BUCKET AND ARM COMBINATION
Bucket capacity (heaped)
SAE, PCSA CECE
3 3
0.49 m 0.45 m
3 3
0.77 m 0.71 m
3 3
0.95 m 0.86 m
3 3
1.19 m 1.07 m
1.30 m 3 1.12 m 3
These charts are based on over-side stability with fully loaded bucket at maximum
reach.
A wide variety of buckets & attachments is available. Contact your local dealer for
more information.
5-18 5-16
: digging or loading sand, gravel, clay etc.
: digging or loading dry, uncaked earth and sand, mud etc.
: loading dry, loose earth and sand
Width
Weight
(with side cutters)
Without side cutters
650 mm 513 kg
968 mm 616 kg
1050 mm 666 kg
1250 mm 752 kg
1450 mm 800 kg
No.
2.0 m 2.5 m
of teeth
(8'2")
(6'7'')
3
3
4
5
5
Material weight up to 1.8 t/m3 (3030 lb/cu.yd).
Material weight up to 1.5 t/m3 (2530 lb/cu.yd).
Material weight up to 1.2 t/m3 (2020 lb/cu.yd).
Arm
3.5 m
3.05 m
(10') (11'5")
x
x