Table of Contents
Advertisement
28. MACHINES READY FOR ATTACHMENTS
28.2.1 CONNECTING HYDRAULIC CIRCUIT
When connecting the attachment, connect the circuit as follows.
1.
Remove blind plugs
places, left and right).
Take care not to lose or damage the removed parts.
2.
Connect attachment tubes
turer to the end from which the plug was removed in step 1.
PATH OF OIL
The direction of operation of the pedal and the path of the oil are as
shown in the diagram below.
5-8
located on the end of the stop valve piping (2
supplied by the attachment manufac-
Advertisement
Chapters
Table of Contents
