Care And Cleaning; Cleaning The Stainless Steel Housing; Cleaning The Ice Cream Bowl; Cleaning The Paddle - Breville Smart Scoop BCI600 Instruction Book

Care & Cleaning
Ensure that the ice cream machine is turned
off by pressing the POWER button. The
ice cream machine is off when the 'START
| PAUSE' button 's LCD light is no longer
illuminating red. Remove the power plug
from the power outlet. Allow the ice cream
machine compressor to cool completely before
disassembling and cleaning.
CLEANING THE STAINLESS
STEEL HOUSING
1. Wipe the exterior of the stainless steel
housing and the LCD screen with a soft
damp cloth. A non-abrasive liquid cleanser
or mild spray solution may be used to avoid
build up of stains. Apply the cleanser to the
sponge, not the outer surface or LCD screen,
before cleaning. Do not use a dry paper
towel or cloth to clean the LCD screen, or
use an abrasive cleanser or metal scouring
pad to clean any part of the ice cream
machine as these will scratch the surface.
2. If over-spill of cream, milk, chocolate etc.
occurs in the interior chamber, carefully
remove them using a soft, damp cloth.
3. Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet.
NOTE
Never immerse the stainless steel housing in
water or place in the dishwasher. Take care not
to allow water or cleaning fluids to seep under
the buttons or LCD screen on the control panel.
CLEANING THE LID
The lid can be cleaned in warm soapy water,
using a soft sponge. Do not use an abrasive
cleanser or metal scouring pad as these
will scratch the surface. Let all surfaces dry
thoroughly prior to placing into the ice cream
machine.
18

CLEANING THE ICE CREAM BOWL

Fill the ice cream bowl up half way with warm
soapy water. A non-abrasive liquid cleanser
or mild spray solution may be used. Allow to
stand for 10-20 minutes.
NOTE
Ice Cream Bowl is NOT dishwasher safe.
To clean the ice cream chamber ensure that the
machine is at room temperature. Wipe inside
chamber with a damp cloth and soapy water.
Once clean, dry thoroughly.

CLEANING THE PADDLE

Wash the paddle with warm soapy water.
Using the bottle brush supplied insert this in
the central part of the paddle and spin while
plunging in and out to remove all residue.
Let all surfaces dry thoroughly before
reassembling the ice cream machine
NOTE
Paddle is dishwasher safe on the top rack
ONLY.