Pre-Cool Function - Breville Smart Scoop BCI600 Instruction Book

1. Lock lid into position by placing the handle
at the align arrow on the machine at the
2 o'clock position and turning the handle
clockwise to the 3 o'clock position and
aligned to the lock graphic.
NOTE
The pull ring for lid should be at the 6 o'clock
position.
2. Press the POWER button to turn the
machine on.
3. Choose MANUAL mode or AUTO mode
by either using the hardness dial for AUTO
mode or the arrow
MANUAL mode.
4. For AUTO mode turn hardness dial to the
desired frozen dessert setting (e.g. frozen
yogurt). Press the START | PAUSE button to
begin the churning process.
5. For MANUAL mode press the arrow up
or button to select MANUAL mode.
6. Using the same arrow buttons now press up
or down to select the time that you require
the machine to chill and churn. The time is
displayed on the LCD display and will move
in five (5) minute increments up to
180 minutes.
7. Press START | PAUSE button to begin
the process.
NOTE
It is important that the paddle is properly
assembled onto the drive shaft to ensure
ingredients are mixed.
buttons for

Pre-cool function

• The PRE-COOL function can be selected
in either the AUTO or MANUAL mode.
This function will cool the machine to
approximately 14°F ~ -22°F/ -10°C ~ -30°C in
5-10 minutes.
• If selected the surrounding button will
illuminate from white to red and 'PRE-
COOLING' will flash on the LCD screen.
• Once the machine has reached optimum
temperature from pre-cooling, it will beep,
the LCD will illuminate READY, and PRESS
START will flash on the LCD. The paddle
will start turning after 15 minutes has passed,
but will not start making the frozen dessert
unless the START| PAUSE button is pressed.
In this function the LCD screen will display
the temperature, 'PRE-COOLING' will flash,
to let you know that you are in this mode.
• PRE-COOL will return to standby after
20 minutes or alternatively can be turned off
either by pressing PRE-COOL button again
or pressing the START | PAUSE button which
will override the PRE-COOL mode.
NOTE
• Bowl must be inserted while using
PRE-COOl Function.
• PRE-COOL can only be operated in the stand
by mode and is not available after the START
| PAUSE button is pressed.
• The machine will NOT automatically start
churning. The START | PAUSE button will
have to be pressed to start the churning
process.
11