Table of Contents
Advertisement
Automatic Comms Download.
If you have a permanent comms connection with the 2400-A16-SD-NET, it is possible to set the station programmer
software to automatically download new data from the SD card at selectable time intervals.
This method is safe to use on the stations serial comms ports, as the automatic upload sizes will be small.
Note: If the 2400-A16-SD-NET station is also being used with a MicroScan SCADA system, then make sure to connect
to the station on one of the separate comms ports.
Same as before:
Click on 'Upload Memory Data' in the
Memory View Comms tab.
Then click on the 'Automatic' tab.
Select an automatic upload time interval
from the drop down menu.
Click 'OK'.
16
www.intech.co.nz
Christchurch Ph: +64 3 343 0646
Auckland Ph: 09 827 1930
Email:
sales@intech.co.nz
2400-A16-SD-NET 290618
Advertisement
Table of Contents
