Importing Sd Card Data Into Station Programmer Via Comms; Manual Comms Download - Intech Micro 2400-A16-SD-NET Installation Manual

Importing SD Card Data into Station Programmer via Comms.

Manual Comms Download.

It is also possible to download data from the stations SD card without having to remove it by using the on board comms
ports.
IMPORTANT:
Using serial comms to manually download data is very slow, and is not recommended. The Ethernet TCP/IP comms
port on the 2400-A16-SD-NET station can be used to download the data from the SD card at a much faster rate (though
still not as fast as direct read from the SD card on your computer).
SD Download is NOT possible over Z-2400 Wireless link.
When using the serial comms to read SD data, ONLY ONE COMPUTER CAN READ DATA FROM THE SD CARD.
i.e. It is NOT possible to use the memory software on Port 1 and then connect another computer on Port 2 to read the
same SD data from the same station.
Click 'Upload'.
The program returns to the main window
and the progress is shown near the
bottom.
15
In the main window of the station
programmer software click on the
'Memory View Comms' tab.
Then click 'Upload Memory Data'.