Ordering Information. All 2400-A16 stations come standard (Default ex factory calibration) with: All Input Channels Configured to RTD Pt100 0~100°C. 4 Dedicated Digital Inputs. 2 Analogue 4~20mA Outputs. 2 Relay Outputs. RS485 or RS232 on Comms Port 2. ITEM CODE DESCRIPTION 16 Isolated Universal Input Channels.
SD Cards. Please only use the supplied micro SD cards from Intech Instruments Ltd. Always handle the SD cards carefully - avoid touching the gold contacts. The SD software stores the 2400-A16-SD-NET station’s serial number in the SD card. When the same SD card is put back into the same station, the serial number will be recognised and data will be added to the end of the existing data series.
Section 2 - Intech Micro Station Programmer Software. The user friendly Intech Micro Station Programmer Software is used for programming the Intech Micro 2400/2100 stations and the reading of SD cards on the 2400-A16-SD-NET. This software can be downloaded for free from www.intech.co.nz/downloads...
Station Setup - Setting up the 2400-A16-SD-NET for Logging. Add the station to the Station programmer: click Note: You must add the station to the memory of the software so the station Input Ranges and Memory Pages & Lines setup can be completed. ...
SD Card Configuration and Setup. Memory Viewer Mode. In the Memory Viewer mode, the Connection tabs are removed and the software can only be used for SD memory functions. Click the button. To return to Full mode, click the button Configuring Page &...
Select the station, then click the ‘Configure Pages & Lines’ button. To edit a page, select the page and click ‘Edit Page’. To edit a line, select the line and click ‘Edit Line’. To create a new page, click ‘Add Page’. Up to 10 pages can be created, with up to 10 lines per page.
Importing SD Card Data into Station Programmer. Press the Safe Eject button on the station (‘PRESS BEFORE REMOVING SD PRESS BEFORE REMOVING PRESS BEFORE REMOVING SD SD’ button The SAFE LED will come on. Press the SD card in, this will unlock the SD latch and the card will pop out slightly. The SAFE LED will go out.
Identify SD. The Identify SD function will allow you to show what information is on the card without extracting it: Insert the SD card into the computer and click the ‘Identify SD’ button. Click ‘View Data’ to view the time/date stamp of all data in the SD file as shown below.
Page 13
Batch View of Data. The Batch view shows each download as one screen of data. Display Options can be used to change background colour and fonts. Line Details Graph Scale Mouse Track Multi Track...
Exporting Data From Station Programmer. To export data from Station Programmer to another format (e.g. CSV), start by opening the data you want in the ‘View Graph’ screen. Then near the bottom right, click on ‘Details’. The ‘History File Detail’ screen shows a list of batch downloads starting from the latest.
Importing SD Card Data into Station Programmer via Comms. Manual Comms Download. It is also possible to download data from the stations SD card without having to remove it by using the on board comms ports. In the main window of the station programmer software click on the ‘Memory View Comms’...
Note: If the 2400-A16-SD-NET station is also being used with a MicroScan SCADA system, then make sure to connect to the station on one of the separate comms ports. www.intech.co.nz Christchurch Ph: +64 3 343 0646 Auckland Ph: 09 827 1930 Email: sales@intech.co.nz...