Importing Sd Card Data Into Station Programmer - Intech Micro 2400-A16-SD-NET Installation Manual

Importing SD Card Data into Station Programmer.

Press the Safe Eject button on the station ('PRESS BEFORE REMOVING SD PRESS BEFORE REMOVING PRESS BEFORE REMOVING SD SD' button ).
The SAFE LED will come on. Press the SD card in, this will unlock the SD latch and the card will pop out slightly. The
SAFE LED will go out. Remove the SD card and place into a SD reading tool (either SD adaptor or USB to SD adaptor),
then plug into the computer. Windows should detect the SD card as a removable drive.
On the SD software, click the 'Memory View SD Read' tab. Click the 'Import SD Data' button. The SD software will
search the computers removable drives for the SD log file and then read the data out. All new downloads are read to
new files and then mapped together for graphing.
When the SD read is complete, the SD card needs to be returned to the station as soon as possible for logging to
resume. Safely Eject (see below), the SD card from the computer and take it to the 2400-A16-SD-NET. Insert the SD
card and you will hear a click, the RECORD LED should come back on.
After the Safe Eject button is pressed, you have 20 seconds to remove the SD card. After this time the Safe LED will go
out and RECORD mode starts again.
Click 'Import SD Data'.
Click 'OK'
Progress windows as data is being read:
Completion information is shown.
The View Graph window will then be displayed.
Please take the SD card out of the computer (Use Windows safely remove hardware) and insert back into the
2400-A16-SD-NET.
Each SD upload is read into one set of files in the memory viewer program, and chained together using the MicroScan
History page.map files.
11