If The Target Image Is Not Projected; Using The Home Screen - Epson H928A User Manual

Basic Operations

If the target image is not projected

If the image is not projected, you can change the source using one of the following methods.
Remote control
Press the button for the target port.

Using the Home Screen

The Home screen feature allows you to easily select an image source and access useful functions.
Press the button on the remote control to display the Home screen.
Under the following conditions, the Home screen is displayed automatically when the projector is turned on.
• Home Screen Auto Disp. is set to On. s Extended - Home Screen - Home Screen Auto Disp.
• There are no signals from any sources.
a
Selects the source you want to project.
b
Connection Guide is displayed.
c
Displays the Configuration menu.
d
Performs menu options assigned to Home Screen in the Extended menu.
Extended - Home Screen
s
e
Sets the 3D function.
f
Selects the Color Mode.
p.71
s
p.78
Signal - 3D Setup p.74
s
p.32
s
Control panel
Press the button and select the target port.
Press the button to confirm the selection.
26
p.78