Rear - Epson H928A User Manual

Introduction

Rear

Name
a Security slot (
)
b Power inlet
c Remote receiver
d Opt.HDMI port
e HDMI1 port
f HDMI2 port
g USB-A port
h Service port
i LAN port
j PC port
k RS-232C port
l Trigger Out port
The security slot compatible with the MicroSaver security system manufac-
tured by Kensington. For more details, visit the homepage of Kensington at
http://www.kensington.com/.
Connect the power cord.
Receives signals from the remote control.
Connects the power supply port for the optical HDMI cable. However, con-
nection for all the devices is not guaranteed. Make sure to check if your device
works beforehand.
Connects HDMI compatible video equipment and computers.
HDMI1/HDMI2 ports support HDCP 2.2.
Connects the optional Wireless LAN unit. It is also used when updating the
firmware. p.21
s
Service port. This is not normally used.
Connects a LAN cable to connect to a network.
Connects to the RGB output port on a computer.
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
Connects with external devices such as motorized screens.
12
Function
p.25
s
p.24
s
s
p.19
s
p.21
p.20
s
p.20
s