Basic Operations; Projecting Images; Turning On The Projector; If The Target Image Is Not Projected - Epson EH-TW6700W User Manual

Basic Operations

Projecting Images

Turning On the Projector

a
Connect the equipment to the
projector.
b
Connect using the power cord
supplied.
c
Remove the lens cap.
d
Turn on the connected equipment.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
Setting - Child Lock/Control Panel Lock
•
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
High Altitude Mode

If the target image is not projected

If the image is not projected, you can change the source using one of the following methods.
p.89
p.92
28
e
Press the button on the remote
control or the
control panel to turn on the projector.
Remote control
The projector's operation indicator flashes
blue as the projector warms up. Once the
projector is warmed up, the power
indicator and the operation indicator turn
blue.
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power cord
to the projector without having to
press any buttons.
Operation - Direct Power
On p.92
Warning
• Do not look into the lens during projection. The
powerful light emitted could cause damage to
eyesight.
• Do not stand in front of the lens during projection.
Clothes could be damaged due to the high
temperature.
Signal - Auto Setup
s
s
button on the
Control panel
Extended -
s
Settings - Lock
s
p.88
Extended - Operation -