Table of Contents
Advertisement
6 - ADJUSTING THE AIR FLOW
HORIZONTALLY
• The air flow can be adjusted horizontally by moving
the vertical fins to the right or to the left.
VERTICALLY
• To be adjusted in the required position when brought
into operation by the technician (by pressing the
motorised flap "SWEEP" switch located in the electric
box).
• In cooling mode, do not direct the damper downwards
more than 30° so as to avoid the formation of droplets
of condensation which could fall on the floor.
PRECAUTIONS
• Do not move the damper by hand.
RECOMMENDED POSITION FOR THE DAMPER
CEILING
INSTALLATION
" A"
" B "
Zone "A" for cooling
7 - MAINTENANCE AND CLEANING
IMPORTANT
• For safety reasons : switch off the air conditioner and disconnect from the mains before starting cleaning (see §
1).
• Do not pour water onto the appliance to clean it. This could damage the internal components and cause electrical
discharges.
FRAME AND GRILLE
• Clean the frame and the grille of the appliance with a vacuum cleaner brush or with a soft, clean cloth.
If these parts are dirty, clean them with a clean cloth moistened with a mild liquid detergent.
When cleaning the grille, be careful not to change the position of the fins by rubbing them.
PRECAUTIONS
• Never use solvents or powerful chemicals. Do not clean with very hot water.
LEFT
Vertical fins
UPWARDS
DOWNWARDS
FLOOR
INSTALLATION
" B "
Zone "B" for heating
GB
RIGHT
Damper
" A"
30°
5
Advertisement
Table of Contents
