Adding Salt - Kenwood KDW60X18 Installation Instructions Manual

adding salt

If you live in a hard water area deposits may form on your dishes and utensils. Using salt softens
the water and reduces the formation of deposits.
Please follow the steps below to fill the salt reservoir. The water hardness level will also need to be set.
1. Remove the lower basket and turn the reservoir cap anticlockwise.
2. Pour in approximately 1 kg of dishwasher salt.
3. Fill the reservoir with water until it overflows (first use only).
4. Clean any excess salt from around the reservoir opening
and then screw the cap on again firmly.
5. Run the "Rinse" programme P5 immediately (without any
crockery in the dishwasher) to remove any traces of salt from
the compartment.
• The salt low warning indicator on the control panel will illuminate when the reservoir is
running out of salt and requires refilling.
• Once refilled, the salt low warning indicator will cease to illuminate within a few days,
depending on how quickly the salt dissolves.
• Do not use everyday table salt or cooking salt as they contain insoluble
substances which could damage the dishwasher.
• Do not pour detergent into the salt container. This will damage the dishwasher.
* All images are for reference only; please refer to your individual unit for actual item.
Kenwood Freestanding Dishwasher KDW60T18/X18 Manual.indd 21
open
21
07/06/2018 15:59