Manual Addenda; Safety Symbols And Terms; Specifications; Unpacking And Inspection - Keithley 7013-S Instruction Manual

General Information
further information. When returning the card for
repair, be sure to fill out and include the service form at
the back of this manual in order to provide the repair
facility with the necessary information.
1.4

Manual addenda

Any improvements or changes concerning the switch
card or manual will be explained in an addendum
included with the card. Addenda are provided in a
page-replacement format. Simply replace the obsolete
pages with the new pages.
1.5

Safety symbols and terms

The following symbols and terms may be found on an
instrument or used in this manual.
!
The symbol on an instrument indicates that the
user should refer to the operating instructions located
in the instruction manual.
The symbol on an instrument shows that high
voltage may be present on the terminal(s). Use stan-
dard safety precautions to avoid personal contact with
these voltages.
The WARNING heading used in this manual explains
dangers that might result in personal injury or death.
Always read the associated information very carefully
before performing the indicated procedure.
The CAUTION heading used in this manual explains
hazards that could damage the switch card. Such dam-
age may invalidate the warranty.
1-2
1.6 Specifications
Model 7013 specifications may be found at the front of
this manual. These specifications are exclusive of the
Model 7001 mainframe specifications.
1.7

Unpacking and inspection

1.7.1

Inspection for damage

The Model 7013 is packaged in a re-sealable, anti-static
bag to protect it from damage due to static discharge
and from contamination that could degrade its perfor-
mance. Before removing the card from the bag, observe
the following precautions on handling.
Handling precautions:
1. Always grasp the card by the side edges and shields.
Do not touch the board surfaces or components.
2. When not installed in a Model 7001 mainframe,
keep the card in the anti-static bag and store it in the
original packing carton.
After removing the card from its anti-static bag, inspect
it for any obvious signs of physical damage. Report
any such damage to the shipping agent immediately.

1.7.2 Shipping contents

The following items are included with every Model
7013 order:
• Model 7013 20-channel Relay Switch Card
• Model 7013 Instruction Manual
• Additional accessories as ordered.