Table of Contents
Advertisement
1.1
Introduction
This section contains general information about the
Model 7013 20-Channel Relay card.
There are two basic versions of this relay switch card;
the Model 7013-S and the Model 7013-C. The Model
7013-S assembly consists of a screw terminal connector
card and the relay card. External test circuits are wired
directly to the screw terminals of the connector card.
Also available from Keithley is the Model 7013-ST. This
is an extra screw terminal connector card. With an extra
connector card, you can wire a second test system
without disturbing the wiring configuration of the first
test system.
The Model 7013-C assembly consists of a multi-pin
(mass termination) connector card and the relay card.
External test circuit connections to the 7013 are made
via the 96-pin male DIN connector on the connector
card. Keithley offers a variety of optional accessories
that can be used to make connections to the connector
card (see paragraph 1.9).
The rest of Section 1 is arranged in the following
manner:
1.2
Features
1.3
Warranty information
General Information
1.4
1.5
1.6
1.7
1.8
1.9
1.2
The Model 7013 is a general purpose, 20-channel relay
switch card. Some of the key features include:
•
Low contact potential and offset current for mini-
mal effects on low-level signals.
•
The connector board detaches from the relay
board. This allows easy access to the screw termi-
nals of the Model 7013-S.
1.3
Warranty information is located on the inside front
cover of this instruction manual. Should your Model
7013 require warranty service, contact the Keithley rep-
resentative or authorized repair facility in your area for
Manual addenda
Safety symbols and terms
Specifications
Unpacking and inspection
Repacking for shipment
Optional accessories
Features
Warranty information
1
1-1
Advertisement
Table of Contents
