HP StorageWorks XP10000 User Manual page 76

Table 25 BC error codes (continued)
Error Description
Code
1017 A Reserve volume cannot be set because the max.
number of Reserve volumes was exceeded.
101E The Reserve volume itself does not exist in the
system.
1026 It is impossible to make a pair any more because
the volume that was specified as P-VOL is root
volume already.
1027 It is impossible to make a pair any more because
the volume that was specified as P-VOL is node
volume already.
1028 It is impossible to make a pair because the volume
that was specified as P-VOL is leaf volume already.
1029 It is impossible to make a pair because the volume
that was specified as S-VOL is leaf volume already.
102E P-VOL is used as source volume for HIHSM.
102F P-VOL is used as destination volume for HIHSM.
1030 The specified P-VOL number does not exist.
1031 The specified P-VOL has been set as a Reserve
volume.
1032 No more pairs can be created for the specified
P-VOL.
1033 The specified P-VOL is not really a P-VOL.
1037 The specified P-VOL has been set as a BC S-VOL.
103A The Pairresync command was issued to a device in
the SMPL status.
103B It is impossible to make a pair because volume that
was specified as S-VOL is root volume already.
103C It is impossible to make a pair because volume that
was specified as S-VOL is node volume already.
103D It is impossible for L2 pair to require a split
because L1 pair is not in the split condition.
103E A new pair was created with a P-VOL forming the
CA cooperation pattern.
103F A pair status cannot be changed to form the CA
cooperation pattern.
1040 The specified S-VOL does not exist.
1042 S-VOL is used as destination volume for HIHSM.
1043 The specified S-VOL number has already been
used as that of an S-VOL.
1044 The specified S-VOL is not a BC S-VOL.
1046 The specified secondary volume is being used as a
CA P-VOL.
76 Business Copy XP (BC) for the XP10000/XP12000
Corrective Action
Delete any Reserve volumes.
Set one or more Reserve volumes.
Delete some of the pairs of root volume.
Delete some of the pairs of node volume.
Confirm a pair condition.
Confirm a pair condition.
Confirm a matching condition.
Confirm a matching condition.
Retry after refreshing the screen.
Check pair status.
Delete any pairs formed by the P-VOL.
Check pair status.
Check pair status.
Check pair status.
Confirm a pair condition.
Confirm a pair condition.
After making L1 pair a split condition, re-execute.
Place the BC pair in SMPL status, or place the
Continuous Access XP pair that uses the BC S-VOL
as a P-VOL in SMPL status.
Place the Continuous Access XP pair that uses the
BC S-VOL as a P-VOL in PSUE or SMPL status.
Set one or more Reserve volumes.
Confirm a matching condition.
Check pair status.
Check pair status.
Delete the Continuous Access XP pair.