Preset Volume List - HP StorageWorks XP10000 User Manual

Business copy xp

Hide thumbs Also See for StorageWorks XP10000:

Owner's manual (92 pages)

Site preparation manual (80 pages)

Site prep manual (78 pages)

Table Of Contents

Table of Contents

•

Volume Type:

• Internal Vol: Displays or hides internal volumes.

• External Vol: Displays or hides external volumes.

NOTE:

•

Attribute:

• Reserve(d): Displays reserved or unreserved volumes. If you select the Reserve(d) check box, only

reserved volumes appear in the Volume list. If you clear the Reserve(d) check box, only unreserved

volumes appear.

NOTE:

• Pair: Displays paired volumes.

• Non-Pair: Displays non-paired volumes.

• External Vol: Displays external volumes.

• Cascade: Filters pairs in the Volume list by cascade level. Selecting L1 displays only L1 pairs.

Selecting L1-L2 displays L1 and L2 pairs.

•

Pair Status:

• BC: Displays or hides BC pairs.

• Snapshot XP: Displays or hides Snapshot XP pairs.

NOTE:

•

BC: Check boxes for the pair statuses are available only when you select the Pair check box in the

Attribute box. If you select the check boxes, you can display pairs in those statuses. You must also select

the BC check box in the Pair Status tab to use these check boxes.

•

Snapshot XP: This tab is for Snapshot XP pairs, and only appears if Snapshot XP is installed. For more

information, see the HP StorageWorks Snapshot XP user guide.

•

OK button: Applies the settings, and closes the Display Filter window.

•

Cancel button: Resets the settings, and closes the Display Filter window.

NOTE:

Filter settings are only effective within the current BC session. If you switch to another program

feature (such as LUN Manager or Continuous Access XP) or click a button on the toolbar, the settings are

reset.