start the paircreate operations. To open the Paircreate window, select one or more SMPL volumes or PSUS
pairs in the Volume list on the BC main screen, right-click the selected volumes, and select Paircreate.
Figure 34
Paircreate window
The Paircreate window consists of the following components:
• "Paircreate Volume
• "Copy Pace
• "Select MU
• "Select S-Vol
•
"Buttons" on page 61
• "Creating L1
• "Creating L2
Paircreate Volume List
The Volume List in the upper half of the Paircreate window displays the following information about the
P-VOL and S-VOL used for creating a pair:
NOTE:
The S-VOL for each P-VOL is displayed only after being selected (using Set or Change).
•
Port: Port ID (cluster and channel number) of the P-VOL.
•
G-ID: Host group ID of the P-VOL.
•
LUN: CU:LDEV of the P-VOL.
NOTE:
volume.
•
MU: MU number of the P-VOL.
•
Status: Status of the P-VOL.
•
Port: Port ID (cluster and channel number) of the first S-VOL of each volume pair.
•
G-ID: Host group ID of the S-VOL.
List" on page 59
list" on page 60
list" on page 60
box" on page 60
pairs" on page 61
pairs" on page 62
An LDEV number ending with # (for example, 00:01#) indicates the LDEV is an external
Business Copy XP user guide for the XP10000/XP12000
59