Page 2
Serial plate location for unit with Suction ..........back of Suction unit Technical data For further information visit www.eschmann.co.uk All correspondence relating to the after sales service of Eschmann Equipment to be addressed to : UK Customers Eschmann Equipment, Peter Road, Lancing, West Sussex BN15 8TJ, England.
1.10 The Twin Drip Pole Kit (REF 81-464-03) can be The reusable jars supplied with the suction unit are fitted easily to either, or both sides, of the ST80 Trolley. used with a disposable liner system, as detailed on the...
TROLLEY SYSTEM 2. SAFETY NOTES WARNING Operators of this unit should be aware of the When using the ESCHMANN ST80 TROLLEY potential risks of ‘Cross Contamination’ and SYSTEM, attention to the following points will ‘Biological Contamination’ whilst using this prolong the life of your Trolley System and help equipment.
WARNING Green/Yellow ....Earth The ST80 high vacuum suction unit should not be Dispose of the removed plug safely having first removed used for continuous drainage of body cavities.
INSTRUCTIONS FOR USE - SUCTION SYSTEM Inlet connection Liner use Clear top The ST80 suction system uses a jar and disposable liner system. The leaflet (S-IM08) supplied with the unit explains how to use them. Outlet NOTE: Graduations are approximate; suitable volume...
Should the overload switch operate to stop the motor it is essential to disconnect the electrical supply to the unit before attempting any form of maintenance. In the case of faults which cannot be resolved, please contact the Eschmann After Sales Service Department (see inside front cover for contact information).
(item 4), ensuring connector pins 12 Fig.3) sockets and connect flexible light guide to adapter. are aligned with sockets, and push lamp firmly (See parts list page 4 for adapters available from Eschmann into position. Equipment) Raise fibrelight chassis and secure in closed position.
Need help?
Do you have a question about the ST80 and is the answer not in the manual?
Questions and answers