Table of Contents
Advertisement
3. Place your DRG
Place your DRG on the FTU so that the tabs on the side of the DRG
align with the notches on the FTU. Both tabs and notches are shown
circled on the right.
Slide the DRG up in the direction of the arrow until the fiber
connector(s) click(s) gently into place.
Notches
Tabs
4. Connect to power
Connect the supplied power adaptor to the power socket on the DRG
and then plug the adaptor into an AC socket.
If your DRG has a power button, push it to switch on the device.
When the
LED is green, your DRG has successfully powered on.
9
Hide quick links:
Advertisement
Table of Contents
