LAN (Network) Setup
1. Check your connection
Open a web-browser on your computer and try to visit a web page.
For example, load your usual home page or favorite search engine.
If the web page loads, your connection is working properly. Skip the
rest of this section and continue to the wireless set up section of this
Full Installation Guide.
If the web page does not load, continue with step 2. Check your
network settings.
2. Check your network settings
You need to make sure your computer network settings are set to:
›
Use IPv4
›
Obtain an IP address automatically (DHCP)
›
Obtain DNS server(s) automatically
12
On a Windows computer:
›
Open "Start"
›
Select "Control Panel"
›
Select "Network and Internet"
›
Got to "Network and Sharing Center"
›
Select "Change Adapter Settings"
›
Double click on the correct network adaptor and click on
Properties
›
Select the "Internet Protocol Version 4 (TCP/IPv4)" option and
choose Properties
›
Ensure "Obtain an IP address automatically" is selected
›
Ensure "Obtain DNS server address automatically" is selected
›
Close all the control panel windows