Tailwind iQ3 User Manual page 8

STEP 5 - CONNECTING THE TAILWIND CONTROL WIRE
TO EASILY IDENTIFY WHERE TO CONNECT GO TO
GOTAILWIND.COM/INSTALLATION. FIND THE
COMPATIBILITY SECTION AND SELECT YOUR DOOR
OPENER. A DRAWING SHOWING WHERE TO CONNECT
THESE WIRES WILL BE PROVIDED
1. ON THE BACK OF THE DOOR OPENER UNIT LOCATE THE INPUT TERMINAL BLOCK
WHERE THERE ARE WIRES CONNECTED TO THE DOOR OPENER UNIT
2. TO IDENTIFY WHICH 2 TERMINALS TO CONNECT THE TAILWIND WIRES TO,
SIMPLY FOLLOW THE EXISTING WIRES COMING FROM THE WALL MOUNTED
CONTROL
3. WITH A SMALL FLAT HEAD SCREWDRIVER DEPRESS THE SLOT OPENER AND
INSERT THE FIRST TAILWIND WIRE INTO ONE OF THE TERMINALS
4. NEXT, INSTALL THE REMAINING WIRE INTO THE OTHER TERMINAL. IT DOES NOT
MATTER WHICH TAILWIND WIRE GOES INTO WHICH TERMINAL
5. ENSURE THE PRE-EXISTING WIRES REMAIN INSTALLED AND THAT YOU HAVE
SIMPLY ADDED THE TAILWIND WIRES
NOTE: SOME DOOR OPENERS DO NOT HAVE PUSH-IN STYLE TERMINALS AND
INSTEAD USE SCREW TERMINALS THAT YOU CAN SIMPLY UNSCREW, WRAP THE
WIRES AROUND, AND TIGHTEN THE SCREW BACK IN PLACE
8 NEED HELP?
WWW.GOTAILWIND.COM/INSTALLATION
TAILWIND iQ3 USER MANUAL
WWW.