Rear Panel - Samsung DVD-P360K User Manual

Rear Panel

1.DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect to
a compatible Dolby Digital receiver.
- Use to connect to an A/V Amplifier that contains a
Dolby Digital, MPEG2 or DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
video.
- If Component(P-SCAN) Video Output is selected in Setup
Menu, progressive scan mode will work.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- If Component (P-SCAN) Video Output is selected in Setup Menu, S-Video will not work.
- See pages 27-28 to get more information on how to use the setup menu.
1
1 3
3. AUDIO OUT JACKS
4. VIDEO OUT JACK
, P and Y
R B
5. S-VIDEO OUT JACK
2
5
4
- Connect to the Audio input jacks of your television or
audio/video receiver.
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
Component(I-SCAN) or S-Video.
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture quality.
- The Video Output in Setup Menu must be set to
S-Video.
7