PRECAUTIONS PRECAUTIONS 1. Setting up - Refer to the identification label located on the rear of your player for its proper operat- ing voltage. - Install your player in a cabinet with ade- quate ventilation holes. (7~10cm) Do not block ventilation holes on any of the compo- nents for air circulation.
BEFORE BEFORE Accessories Remote Control Batteries for Remote Control (AAA Size) User’s Manual Video/Audio Install Batteries in the Remote control 1. Open the battery cover on the back of the remote control. 2. Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.
SIVE SCAN PICTURE PROBLEMS, IT IS RECOM- MENDED THAT THE USER SWITCH THE CON- NECTION TO THE ‘STANDARD DEFINITION’ OUT- PUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE CENTER.”...
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Audio Video VIDEO-CD Audio Video AUDIO-CD Audio Disc Markings Play Region Number PAL broadcast system in U.K, France, Germany, etc.
STOP, LOAD ... nodSC: No disc loaded. OPEn: The disc tray is open. LOAd: Player is loading disc information. 10. PLAY/PAUSE ( DVD-P360K DVD-P365K OPEN/CLOSE ( Press to open and close the disc tray. DISPLAY Operation indicators are displayed here.
Rear Panel 1.DIGITAL AUDIO OUT JACKS - Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. - Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder. 2.
SKIP Buttons ( Use to skip the title, chapter or track STOP Button ( MENU Button Brings up the DVD player’s menu. ENTER/ This button functions as a toggle switch. 10. EZ VIEW Button The aspect ratio of a picture can easily be adjusted according to the screen size of your TV (16:9 or 4:3).
Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components.
(Audio signals are delivered through the audio output.) Using an S-Video cable (not included), connect the S- VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV.
Page 11
DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
Page 12
DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
Page 13
Connection to an Audio System (2 Channel Amplifier) Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. Using the video signal cable(s), connect the VIDEO, S-...
Page 14
Note - When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound doesn't come out or there will be a big noise.
BASIC FUNCTIONS BASIC FUNCTIONS Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track During play, press the SEARCH ( remote control for more than 1 second.
Using the Disc and Title Menu Using the Disc Menu 1. During the playback of a DVD disc, press the MENU button on the remote control. 2. Press the buttons to select Disc Menu, then press the or ENTER button. Note - Depending on a disc, the Disc Menu may not work.
Using the A-B Repeat function 1. Press the REPEAT button on the remote control. 2. Press the buttons to Select A-B button. 3. Press the ENTER button at the point where you want repeat play to start (A). B is automatically highlighted. 4.
If you are using a 4:3 TV For 16:9 aspect ratio discs - 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. - 4:3 Pan&Scan The left and right portions of the screen are cut off and the central portion of the 16:9 screen is displayed.
Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the ANGLE Function (DVD) If the disc contains multiple angles, the ANGLE appears on the screen. 1. During play or pause mode, press the MENU button on the remote control.
Clearing a Bookmark 1~3. The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 20. 4. Press the buttons to select the bookmark number you want to delete. 5. Press the CANCEL button to delete a bookmark number. Using the Zoom Function Using the Zoom Function (DVD/VCD)
- Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings, or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file recording on CD-Rs...
MPEG4 Function Description Function Description During play, press the Skip button, it moves forward or backward 5 minutes. During play, press the SEARCH ) button and press Search again to search at a faster speed. Allows you to search at a faster speed in an AVI file.
- When the MIC is connected, Digital Out does not work. - If the MIC is connected in VCD 2.0, Playback is selected to Menu off mode automatically. - The MIC sound outputs only from Analog Audio Out. DVD-P360K DVD-P365K...
MENU MENU Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have.
Using the Audio Language 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the or ENTER button. 3. Press the buttons to select Language Setup, then press the or ENTER button. 4.
❷ MPEG-2 Digital Out - PCM : Converts to PCM(2CH) audio. - Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8CH). Select Bitstream when using the Digital Audio Output. ❸ DTS Select On when connecting to a DTS Decoder. - Off : Doesn’t output digital signal.
➏ Video Output Select Video Output. - S-Video : Select when you want to use Video and S-Video Out. - Component (I-SCAN) : Select when you want to use Component Interlace (625i/525i) Out. - Component (P-SCAN) : Select when you want to use Component Progressive (625p/525p) Out.
Page 29
4. Press the button to select Change Password, then press the or ENTER button. Enter your new password. Re-enter the new password again. Rating Level Change Password Setup Rating Level Change Password Setup Rating Level Change Password Setup Note If you have forgotten your password, see “Forgot Password”...
REFERENCE REFERENCE Firmware upgrade Introduction Samsung will often support the software upgrade to improve the performance of this unit to the latest status, through Samsung Internet Site (www.samsung.com). Because the specially new mpeg4 codec continues and it is appearing. What improvements are made depends...
• Check the region number of the DVD. • 5.1 channel sound is reproduced only when the following conditions are met. : 1) The DVD player is connected with the proper Amplifier 5.1 channel sound is 2) The disc is recorded with 5.1 channel sound.
Output *S/N Ratio *Dynamic Range *Total Harmonic Distortion - Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice. - Weight and dimensions are approximate. AC 110-240 V, 60/50 Hz 1.7 Kg 430mm (W) X 207mm (D) X 37mm (H) +5°C to +35°C...
Page 33
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region CANADA North America MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA Latin America JAMAICA...