Version 1.00 - ACS APG8201-B2 Reference Manual

Offset
bInsertionOffsetNe
16
wPINMaxExtraDigit
17
19
bEntryValidationCo
20
21 bNumberMessage
22
24
APG8201-B2 – Reference Manual

Version 1.00

Field Size
1
w
2
bConfirmPIN
1
1
ndition
1
wLangId 2
bMsgIndex1 1
Value Description
Insertion position offset in byte for the
-
new PIN
XXh: Minimum PIN size in digit
XXYYh
YYh: Maximum PIN size in digit
Indicates if a confirmation is requested
before acceptance of a new PIN
(meaning that the user has to enter this
new PIN twice before it is accepted).
Indicates if the current PIN must be
entered and set in the same APDU field
of not.
00h,
b0: (0/1)
01h
If 0 = No confirmation requested
02h,
If 1 = Confirmation requested
03h.
b1: (0/1)
If 0 = No current PIN entry requested.
(In this case, the bInsertinoOffsetOld
value mustn't be taken into account.)
If 1 = Current PIN entry requested
b2 – b7 : RFU
The value is a bit wise OR operation.
01h: Max size reached
-
02h: Validation key pressed
04h: Timeout occurred
Number of messages to display for the
PIN modify command:
00h: no message
01h: Message which index is indicated
00h,
in bMsgIndex1
01h,
02h: Messages which index are
02h,
indicated in bMsgIndex1, and
03h,
bMsgIndex2
or FFh
03h: Messages which index are
indicated in bMsgIndex1, bMsgIndex2,
and bMsgIndex3
FFh: default CCID message
Language used to display the
-
messages.
Message index in the Reader message
table (should be 00h or 01h).
-
The message is the prompt for the user
to enter its new PIN if
bConfirmPIN=00h or its current PIN.
Page 21 of 48
www.acs.com
info@acs.com.hk
.hk
www.acs.com.hk