Pc_To_Rdr_Secure; Table 1: Readeroptions Bit Structure - ACS APG8201-B2 Reference Manual

bSendBuffer[3]=00h;
bSendBuffer[4]=00h;
bSendBuffer[5]=02h;
dwSendBufferLen=06h
SCARDStatus = SCardControl( hSAM, SCARD_CTL_CODE(3500), bSendBuffer,
dwSendBufferLen, bRecvBuffer, dwRecvBufferLen, &dwRecvBufferLen);
Bit 7 Bit 6
Not
used used
7.1.8.

PC_to_RDR_Secure

This command enters the PIN for verification or modification.
Offset
0 bMessageType
1
5
6
7
8 wLevelParameter
10
7.1.8.1. abPINOperationDataStructure
Offset
10
11 abPINDataStructure
7.1.8.2. PIN Verification Data Structure
Offset
APG8201-B2 – Reference Manual
Version 1.00
Bit 5 Bit 4
Not Not Not
used used

Table 1: ReaderOptions Bit Structure

Field Size
1
dwLength
4
bSlot 1
bSeq 1
bBWI 1
2
Byte
abData
array
Field Size
bPINOperation 1
Byte
array
Field Size
Bit 3 Bit 2
Not
616CFlag
used
Value Description
69h
Size of abData field of this message
-
Identifies the slot number for this
00-FFh
command
00-FFh Sequence number for command
Used to extend the CCIDs Block Waiting
Timeout for this current transfer. The
CCID will timeout the block after "this
00-FFh
number multiplied by the Block Waiting
Time" has expired.
0000h RFU (TPDU exchange level)
The value depends of
wLevelParameters. When
-
wLevelParameters is 0000h or 0001h
abData = abPINOperationDataStructure.
Value
Used to indicate the PIN operation:
00-06h 00h: PIN Verification
01h: PIN Modification
PIN Verification Data Structure or
-
PIN Modification Data Structure
Value
Bit 1 Bit 0
EMVMode PPSMode
-
Description
Description
www.acs.com
info@acs.com.hk
www.acs.com.hk
Page 19 of 48
.hk