Ff 00 00 00 [05] D4 40 - ACS AET62 Reference Manual

8.5. Get the Current Setting of the Contactless Interface
Step 1) Get Status Command
<< FF 00 00 00 02 D4 04
>> D5 05 [Err] [Field] [NbTg] [Tg] [BrRx] [BrTx] [Type] 80 90 00
Or if no tag is in the field
>> D5 05 00 00 00 80 90 00
[Err] is an error code corresponding to the latest error detected.
Field indicates if an external RF field is present and detected (Field = 0x01) or not (Field = 0x00).
[NbTg] is the number of targets. The default value is 1.
[Tg]: logical number
[BrRx] : bit rate in reception
•
0x00 : 106 kbps
•
0x01 : 212 kbps
•
0x02 : 424 kbps
[BrTx] : bit rate in transmission
•
0x00 : 106 kbps
•
0x01 : 212 kbps
•
0x02 : 424 kbps
[Type ]: modulation type
•
0x00 : ISO14443 or Mifare®
•
0x10 : FeliCa™
•
0x01 : Active mode
•
0x02 : Innovision Jewel® tag
idvation GmbH
Otto-Hesse-Straße 19 / T5
D-64293 Darmstadt
info@idvation.com
AET62 Reference Manual
Phone +49 6151 4923021
Fax +49 6151 3689296
www.idvation.com
Version 1.0
Page 28 of 37