Push Button Layout; Programming Instructions - Altronix PT2724 Installation Manual

Two (2) channel 365 day 24 hr. timer/controllers
Table of Contents

Advertisement

Push Button
SET
ENTER
UP
DOWN
UP and DOWN keys can be used to select data entries.
After scrolling to the correct entry, depress ENTER to accept.
SW2 DIP Switch
SW3 Slide Switch
A. Setting Clock/Calendar:
Upon initial power up
Depress SET.
Depress ENTER.
Enter the current date, day of week and time (military) by depressing UP and DWN to make the selection,
then depress ENTER to accept.
Next, select either DS (daylight savings mode) or ST (standard time mode) by depressing SET until
Depress ENTER to scroll until flashing cursor appears under DS (daylight savings mode) in display.
To change mode depress UP or DWN until ST (standard time mode) will appear in display.
Depress ENTER to accept correct selection.
Note: The flashing cursor denotes location of data entry selection to be made. If an entry was made in
error or requires changing, depress SET to backspace, make the correct selection and depress ENTER to
accept data and advance the cursor. To change or program clock/calendar simply repeat the steps above.
B. Setting and Adding Events:
Select channel A or B by moving slide switch SW3 to appropriate position.
Note: Channel cannot be changed in the middle of programming events. To change channels, you must
exit programming then change channel switch position then enter program mode again.
1. Setting Events
Depress SET until
Depress ENTER.
Note: A01 indicates Channel A event 01. When cursor
- 4 -

Push Button Layout:

SET
ENTER
Push Button Description Table:
Function/Description
Scrolling keys for programming. Escaping out of existing programming.
Accepts selections made to programming.
Scrolls through selections.
Scrolls through selections.
Selects tandem or individual relay operation.
Selects channel to be programmed.

Programming Instructions:

RLY OFF
SU 01:01
ENTER to
SET TIME
01/01/01
SU/01:01
ENTER to
SET BK
ENTER to
SET EVENT
A01 OFF
SU 00:00
UP
DWN
will appear on display.
will appear on display.
will appear on display.
appears on display.
appears on display.
will appear on display.
appears, you are able to scroll through events.
PT2724

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt2724e

Table of Contents