Specifications - Respironics Amara View Instructions For Use Manual

Specifications

Warning: The technical specifications of the mask are provided for your healthcare
professional to determine if it is compatible with your CPAP or bi-level therapy device.
If used outside these specifications, or if used with incompatible devices, the mask
may be uncomfortable, the seal of the mask may not be effective, optimum therapy
may not be achieved, disconnect alarms may not be detected, and leak, or variation in
the rate of leak, may affect device function. The pressure flow curve shown below is an
approximation of expected performance. Exact measurements may vary.
Pressure Flow Curve
70.0
60.0
50.0
40.0
30.0
20.0
10.0
0.0
0
Resistance with Anti-Asphyxia Valve Closed to Atmosphere
Drop in Pressure at
All sizes
Closed to Atmosphere: A minimum of 3 cm H
the anti-asphyxia valve closes.
Open to Atmosphere: In the absence of positive airway pressure, the anti-
asphyxia valve will open.
Inspiratory and Expiratory Resistance with Anti-Asphyxia Valve Open to
Atmosphere at 50 SLPM
Inspiratory Resistance
Expiratory Resistance
5 10
Pressure cm H
50 SLPM
0.8 cm H O
2
15 20
O
2
100 SLPM
2.0 cm H O
2
O must be maintained to ensure that
2
1.0 cm H O
2
1.5 cm H O
2
8
25 30