Respironics ComfortSelect 1007933 Instructions For Use

Forehead Pad Replacement

If you need to replace the forehead pad, contact your home care provider to reorder. Follow the
instructions below.
Step 1 Remove the pad. Slide the pad outward
toward one edge of the forehead support, and
lift it upward so the connection track on that
side is released from the plastic connection
slot. Next, pull the pad in the opposite
direction to release the connection track on
the other side from its connection slot.
Step 2 Install the new pad. Slide one of the connec-
tion tracks on the new pad into its connection
slot on the support. Pull the pad in the
opposite direction (toward the center) and
slide the other connection track into its
connection slot to lock the pad into place.

Disposal of Parts

Dispose of any damaged or broken parts according to local regulations.

Helpful Tips for Mask Comfort

• Clean your face and mask thor-
oughly before each use.
• Make sure the mask is the correct
size for your face.
• Do not overtighten the headgear.
Overtightening can irritate your face,
increase leaks, or cause damage to
the mask.
• Replace the cushion and forehead
pad if they become hardened or
deformed.
US and other patents pending
connection track
forehead
connection slot
support
ORDER NO. ITEM
1007933 ComfortSelect Nasal Mask, Small
1007932 ComfortSelect Nasal Mask, Medium
1007934 ComfortSelect Nasal Mask, Small Wide
1002800 Deluxe Headgear
1007930 ComfortSelect Nasal Mask & Headgear,
Small
1007919 ComfortSelect Nasal Mask & Headgear,
Medium
1007931 ComfortSelect Nasal Mask & Headgear,
Small Wide
1007936 ComfortSelect Cushion, Small
1007935 ComfortSelect Cushion, Medium
1007937 ComfortSelect Cushion, Small Wide
1018401 Forehead Support and Pad
1009722 Silicone Forehead Pads, 4 pack
1009723 Ball-and-Socket Headgear Swivel Clips
(2 pk)
1008814 ComfortSelect Retaining Ring
1004395 Exhalation Elbow Kit
1002720 Split Washer Kit (5 ea.)
7041 Mask Swivel
312710 O Enrichment Attachment
2
The ComfortSelect Nasal Mask and Headgear are intended to provide an
interface for adult (>30 kg) patients when used with Respironics CPAP or bi-
level therapy. The mask contains an exhalation device that provides a
continuous leak path in the patient circuit. This mask does not require the use
of a separate exhalation device. LATEX-FREE
Caution
Warning
Warning
Swivel Clip
Exhalation Device
(DO NOT BLOCK)
1017159
The deadspace associated with this mask is between 119 cc and 129 cc.
HM 9/29/03
Nasal Mask & Deluxe Headgear
Instructions for Use
(Note: The headgear is not included in all
packages and may be purchased separately.)
US federal law restricts this device to sale by or on the order of a
physician.
The ComfortSelect mask is designed for use with CPAP and bi-
level systems recommended by your health care professional or
respiratory therapist. Do not wear this mask unless the CPAP or
bi-level system is turned on and operating properly. DO NOT
block or try to seal the exhalation device.
CPAP and bi-level systems have the potential to allow
rebreathing of exhaled air. CPAP systems are designed for use
with masks (or connectors) that have vent holes or exhalation
devices. When the CPAP system is turned on, new air from the
system flushes the exhaled air out through the vent holes. If the
CPAP system is not operating, the exhaled air may be
rebreathed. Rebreathing of exhaled air for longer than several
minutes can, in some circumstances, lead to suffocation.
Some users may experience skin redness. If this occurs, consult
your health care professional.
Support Arm
Swivel Clip
Swivel
www.respironics.com
Forehead Pad
Forehead Support Arm
Cushion