Placing Calls By Entering Numbers Directly; Placing Calls Using The Redial Button - Huawei eSpace 7910 User Manual

Placing calls
You can perform the following steps to place calls by directly entering numbers.
Step 1 Pick up the phone.
The dialling screen is displayed and the dial tone is played.
The line button LED is steady green.
NOTE You can also enter the dialling screen by pressing the Speaker button, Headset button,
or line button of the account.
Step 2 Enter the number of a contact, or press the Up or Down arrow button to select a number
in the existing numbers.
Step 3 Press Call.
NOTE • You can enter a number and then pick up the phone or press the Call softkey,
Speaker button, or Headset button to place a call to this number.
• When you enter the number of a contact, the phone automatically queries and displays
the contact. For local contacts only, not the Corporate Directory.
• After a contact is selected, you can press Edit Dial to change the number of the contact.
If the plus sign (+) is required when you enter a number, press the * key twice.
End
SETTING THE REDIAL BUTTON
Step 1 On the home screen, choose Apps > Preferences > Buttons > Redial Button.
Step 2 Select Redial directly or Display redial list.
• Redial directly: Press Redial to redial the last dialled number.
• Display redial list: Press Redial to display a list of dialled numbers.
Step 3 Press Select.
End
USING THE REDIAL BUTTON
Step 1 Pick up the phone or press the Speaker button, Headset button, or line button of
the account.
Step 2 Press Redial.
If Redial Button is set to Display redial list, a list of dialled numbers is displayed.
You can select a number to dial, and press Call.
End
4.6.1 PLACING CALLS BY DIRECTLY NNTERING NUMBERS

4.6.2 PLACING CALLS USING THE REDIAL BUTTON

4.6
eSpace 7910 IP Phone User Guide One Net
39