Date And Time; Language; Power Saving - Huawei eSpace 7910 User Manual

Phone Settings – System
NOTE Adjusting the NTP server settings may cause the time and date display to be incorrect
You can perform the following steps to set the date and time:
Step 1 On the home screen, choose Apps > System > Date and Time.
The Date and Time screen is displayed.
Step 2 Select NTP and press Enable to synchronise the system time with the NTP server.
• If you enable NTP, set the time server IP address. For detailed operations, contact your system
administrator.
• If you disable NTP, set Date and Time manually.
Step 3 Set Time Zone, Date Format, and 24-Hour depending on your needs
You can perform the following steps to set the language:
Step 1 On the home screen, choose Apps > System > Language.
The Language screen is displayed.
Step 2 Select a language and press Select
On the Power Saving screen, you can set the following functions:
AUTO SLEEP
If no operation is performed on the phone within a specified period, the phone changes to the sleep state.
SLEEP
AUTO BRIGHTNESS
After this function is enabled, the phone automatically decreases the screen brightness when the phone
is idle or in an active call.
SCREENSAVER
After this function is enabled, the phone automatically changes to the screensaver state if no operation
is performed on the phone within a specified period (value for Delay).
NOTE When the sleep mode and screensaver are enabled at the same time, the sleep mode takes effect
with preference.
When the phone enters the sleep or screensaver state on the home screen, you can press a key
on the key pad, the Headset button, or the Speaker button to directly access the dialing screen;
you can press the Contact button, Call History button, or Message button to access the contacts,
call history, or message screen.
4.2

4.2.1 DATE AND TIME

4.2.2 LANGUAGE

4.2.3 POWER SAVING

29
eSpace 7910 IP Phone User Guide One Net