Section 9: Parts; Main Breakdown - Grizzly G1095 Owner's Manual

We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown
are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability.
-28-

SECTION 9: PARTS

Main Breakdown

170
194
• Do not expose to rain or use in
damp locations.
• AVERTISSEMENT!: Ne pas
G1095 1 HP G1096 1 HP
exposer à la pluie et ne pas
POWER FEEDER POWER FEEDER
utiliser dans les emplacements
humides.
Specifications Specifications
Motor: 1 HP, 240V, 1-Ph, 60 Hz, 4.2/2.5A Motor: 1 HP, 240V, 3-Ph, 60 Hz, 3.4/2.5A
Feeds: 13, 26, 33, 66 FPM Feeds: 13, 26, 33, 66 FPM
Roller Width: 2-3/8'' Roller Width: 2-3/8''
Min. Workpiece Length: 6'' Min. Workpiece Length: 6''
Suspension Travel: 3/4'' Suspension Travel: 3/4''
Max. Roller Height: 8-1/2'' Max. Roller Height: 8-1/2''
Vertical Travel: 9-1/2'' Vertical Travel: 9-1/2''
Horizontal Travel: 24-1/4'' Horizontal Travel: 24-1/4''
Weight: 144 Lbs. Weight: 144 Lbs.
Date Date
Serial # Serial #
Manufactured for Grizzly in Taiwan Manufactured for Grizzly in Taiwan Every 200 Hours
NLGI 2 Grease
WARNING WARNING
To reduce the risk of serious injury To reduce the risk of serious injury
when using this machine: when using this machine:
1. Read and understand owner's 1. Read and understand owner's
manual before operating. manual before operating.
2. Always wear eye protection. 2. Always wear eye protection.
3. Only plug power cord into a 3. Only plug power cord into a
grounded outlet. grounded outlet.
4. Keep hands away from rotating 4. Keep hands away from rotating
wheels or other moving parts wheels or other moving parts
that could cause entanglement. that could cause entanglement.
5. Keep guards in place at all times. 5. Keep guards in place at all times.
6. Do not wear loose clothing, 6. Do not wear loose clothing,
gloves, jewelry, or other items gloves, jewelry, or other items
that can get entangled. Tie back that can get entangled. Tie back
long hair and roll up sleeves. long hair and roll up sleeves.
7. Disconnect power before 7. Disconnect power before
servicing or adjusting. servicing or adjusting.
8. Do not operate under influence 8. Do not operate under influence
of drugs, alcohol, or when tired. of drugs, alcohol, or when tired.
9. Properly install and adjust 9. Properly install and adjust
machine before starting. machine before starting. WARNING!
10. Adjust wheel height for each 10. Adjust wheel height for each
workpiece thickness to reduce workpiece thickness to reduce ENTANGLEMENT
risk of kickback. risk of kickback. HAZARD!
11. Do not use with workpieces 11. Do not use with workpieces Tie back long hair, roll up
long sleeves, and remove
shorter than specified shorter than specified
minimum length. minimum length. loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Model G1095/G1096 (Mfd. Since 8/15)
195
Every 1000 Hours
80-90W Gear Oil 196
197
198
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.